Sculpture Art Work Process

Plastic arts
Sculpture is a branch of the art 3-dimensional tangible results of his work. Usually created by way of sculpting, modeling (e.g. clay) or casting (with mold).
There are several techniques for making sculpture, including ::
1.
Chisel or carving techniques
which is a technique to make a sculpture with a hard object of media materials such as wood, stone, ice beam, silver.

 For this one needs hardware tools such as saws, chisels, hammers, and other.
And requires materials - materials such as, block of ice, stone, wood, ivory, bone, horn and other.
The process of making sculpture carving techniques ::

Step 1
• Prepare the timber according to the size and pattern you drew
• Move the picture / pattern on the surface of the wood. Looks like a pattern on wood image from all sides (top, bottom, left, right, front, back)


Step 2
• Put masking tape on the circular beam. This masking tape serves as a binder. If done cutting / wood connection. However, if the company does not need to be carved using tape

Step 3
• Perform cutting by using a chainsaw from 4 sides. Formation gradually to approach the global shape

Step 4
• Create a global form. Compare with picture / pattern. Try to approach the shape.
• Rub with using paper pads or sandpaper. Rubbing done in 2 stages

Step 5
• Continue to make detail parts
• Puree with sandpaper again

Step 6
• Finished with acrylic paint or melamine

2. Engineering butsir
butsir technique is the technique of making sculpture using soft materials (clay, paper pulp, butsir night, etc.). The material is plastic (easily shaped as desired) While materials that can be used in this technique include clay, Plasticine, paper pulp and the like.

To create a sculpture with butsir technique, requires a tool - a tool as follows: spatula, knife, rope cutters, rollers rolling and other supporting chisel.
Materials to make sculptures with butsir technique is clay, cement, clay, wax, paper pulp, soap, and casts.

The process of making sculpture with butsir techniques are:
• Prepare clay or plasticine
• Prepare tools and water butsir
• Prepare turntable (if any)
• Prepare design drawings sculpture
• Place the clay or plasticine on a turntable piecemeal
• Massage - Massage material to near the desired shape globally
• If the material cannot be added, otherwise if the excess can be reduced
• Enhance forms with tools
• Give the finishing touch to the sculpture and in detail the formation of puree

3. Cast technique
Technique is to make a sculpture cast by withdrawing the material, then poured into a molding tool and wait until it hardens again.

Ingredients cast techniques such as cement and sand, which in melted iron, bronze, brass, gold, silver, copper, and other materials. While the mold tool

The process of making sculpture cast technique ::
• Prepare cement and sand that has been filtered
• Prepare the mold, bucket, scoop the dough, and rubber strap
• Prints tied with rubber strap
• Prepare a mixture of cement, sand, and water to taste
• Pour the batter into the mold until full
• Soak in water for about 2 days
• Open the rubber rope and mold slowly - land
• The final touch sculptures in puree